Learn Apparel
Merchandising, Learn Fashion design.
Summery of full process for Making a Sweater.
Summery of full process for Making a Sweater.
1st step: Yarn Purchase - As per buyer requirement we will purchase
the yarn from yarn supplier. It can be local or foreign yarn. Before purchase
the yarn we must need clear idea regarding the wastage percentage of the each
types yarn. Normally the wastage percentage of cotton & acrylic is 5% to 7%
and for the Viscose, Spandex, Wool etc is 10% to 12%. After in-house the yarn
we should store yarn by their types & count.
2nd step: Winding Section - After receive the yarn from supplier we need
to winding these yarn by coning machine for knitting production. We should also
take care here from mix-up the yarn.
3rd step: Yarn distribution Section - After winding the yarn it goes to yarn distribution section for distribution the yarn to the knitting floor. Here we must ensure that, the correct yarn is distributing for correct gauge knitting machine.
4th Step: Knitting Section - In Knitting section we should knit the body, sleeve etc of the sweater by knitting machine. The operators of knitting machine are called as knitting man. If the sweater is with placket then we will make the placket by auto placket machine.
5th Step: Knitting Inspection Section - After knit the body parts, it will be
inspected by the Q.C team in the inspection section.
6th Step: Linking Section - After pass the Q.C check, the body parts
will be goes to the Linking section. In this section we join the front part,
back part, sleeve etc with the Linking machine.
7th Step: Linking Inspection Section - After linking the body parts, it will be inspected by the Q.C team in the inspection section.
8th Step: Trimming section – In this section the body will be trimmed.
9th Step: Mending section – From trimming section it will be goes to
mending section for mending.
10th Step: Light check section – After mending, the body goes to Light check
section for light checking.
11th Step: Wash section – In this section we washed & dry the
sweater. Then we send it to the Iron section.
12th Step: Iron section - Here we iron the body.
13th Step: Iron inspection section – After ironing the body we inspect the iron
quality in this section.
14th Step: Label attaching section – After iron check we attached the label with
the body by sewing machine.
15th Step: Quality Section – After attached the label with sweater,
quality team check all over quality. It’s called final quality.
16th Step:
Packing section – After the
final check we sent the sweater to packing section for poly & carton. After
make the carton ship out the goods.
No comments:
Post a Comment